boxes and furniture
Player boxes
Icepro PLAYER BOX
player boxes as a part of the rink
The player boxes are an essential part of
the dasher board system as a whole. That is why the rulebook instructions
regarding the measurements and locations are taken into account in the planning.
The planning and supplying of the boxes is always customer specific. The boxes are usually supplied with the same materials as the rink. The shielding, post and board element colours are usually the same as in the rink.
Interested?
Icepro officials´ boxes
officials´ box as a part of the dasher board system
An equally important part of the rink
entirety is the officials´ box. That is why the rulebook instructions regarding
the measurements and locations are also taken into account in the planning.
The planning and supplying of the boxes is always customer specific. The boxes are usually supplied with the same
materials as the rink. The shielding, post and board element colours are
usually the same as in the rink.
Interested?
box structure
Functional and user-oriented boxes significantly ease the activities of players and other staff both in game and training use. ICEPRO’s box solutions use materials and structures that facilitate their use and maintenance.
ICEFLOOR skate-resistant rubber floorboards are installed on top of the box floors. The ICEFLOOR floor is moisture resistant and suitable not only for boxes but also for dressing rooms. ICEFLOOR floor is available with a coin pattern or a smooth surface. The floor colour is dark grey.
COMPOGRID grid-structured box floor. Thanks to the grid structure, the floor is ventilated from below, so mould does not form on it. In addition, it is easy to modify the grid-structured box floor to, for example, make a passage for wires and cables.
Profile framed box walls
box walls
The frame structure of the box walls with a profile system. The frames are upholstered on both sides with polyethylene sheets and finished with an edge rail. The other side of the box wall is covered with removable PE sheets, which allows the sheets to be removed and the walls to be mounted to the ground. The colour scheme of the box walls is the same as in the rink.
box shielding
The properties of boxes vary depending on the site. In the shielding of the boxes, the shielding and posts in the rink are adapted. A 90-degree angle is used in the corners of the boxes, or they can be realized with a curved shield and a curved corner element.
As the stands are immediately behind the boxes, a roof can be placed over the boxes to protect the players and the furniture. The box roof is made with special posts to which the shielding is attached. The post profile structure makes the roof rigid and keeps it straight.
outdoor boxes
outdoor boxes
Quality modular boxes for players and the team officials. The durable outdoor boxes provide protection from wind and rain. The box modules can be built into different entireties depending on the intended use.
Materials
The box walls and the box floors are made of steel frames that are upholstered with plywood. The roof is made out of Pural-coated sheet metal.
installing
The boxes are delivered in parts and with installation instructions which makes the assembling easy.
outdoor box 3m
Quality modular boxes for players and the team officials. The durable outside boxes provide protection from wind and rain. The box modules can be built into different entireties depending on the intended use.
the box entirety:
- Box floors
- Box back wall
- Roof
- Sidewalls
The box can be equipped with a player bench.
OUTdoor box 6m
Quality modular boxes for players and the team officials. The durable outside boxes provide protection from wind and rain. The box modules can be built into different entireties depending on the intended use.
THE BOX ENTIRETY:
- Box floors 2 pcs
- Box back walls 2 pcs
- Roof 2 pcs
- Sidewalls
- Dividing wall
The box can be equipped with player benches.
outdoor box 9m
Quality modular boxes for players and the team officials. The durable outside boxes provide protection from wind and rain. The box modules can be built into different entireties depending on the intended use.
THE BOX ENTIRETY:
- Box floors 3 pcs
- Box back walls 3 pcs
- Roof 3 pcs
- Sidewalls
- Dividing walls
The box can be equipped with player benches.
OUTDOOR BOX 12m
Quality modular boxes for players and the team officials. The durable outside boxes provide protection from wind and rain. The box modules can be built into different entireties depending on the intended use.
THE BOX ENTIRETY:
- Box floors 4 pcs
- Box back walls 4 pcs
- Roof 4 pcs
- Sidewalls
- Dividing walls
The box can be equipped with player benches.
box furniture
Player benches
Player bench with a backrest and
a bottle shelf
Sturdy steel profile framed player bench upholstered with HD-polyethylene. The bench legs are steel profiled with a black protective tube that shields the skates. The benches can be connected to each other and if necessary to the floor.
Bottle shelf that attaches to the player bench
The bottle shelf has room for drinking bottles and two paper holders.
Backrest to the player bench
The backrest is connected to the player bench legs with fasteners.
The stock colour of the bench is black, but it’s also available in red, blue or yellow.
BENCH SIZES:
- Player bench 3m with the backrest and the bottle shelf C10018 + C10024 + C10076
- Player bench 2,5m with the backrest and the bottle shelf C10015 + C10020 + C10063
- Player bench 2m with the backrest and the bottle shelf C10014 + C10019 + C10077
Player bench with
a Backrest
Sturdy steel profile framed player bench upholstered with HD-polyethylene. The bench legs are steel profiled with a black protective tube that shields the skates. The benches can be connected to each other and if necessary to the floor.
Backrest to the player bench
The backrest is connected to the player bench legs with fasteners.
The stock colour of the bench is black, but it’s also available in red, blue or yellow.
BENCH SIZES:
- Player bench 3m with the backrest C10018 + C10024
- Player bench 2,5m with the backrest C10015 + C10020
- Player bench 2m with the backrest C10014 + C10019
Player bench with a bottle shelf
Sturdy steel profile framed player bench upholstered with HD-polyethylene. The bench legs are steel profiled with a black protective tube that shields the skates. The benches can be connected to each other and if necessary to the floor.
Bottle shelf that attaches to the player bench
The bottle shelf has room for drinking bottles and two paper holders.
The stock colour of the bench is black, but it’s also available in red, blue or yellow.
BENCH SIZES:
-
Player bench 3m with a bottle
shelf C10018 + C10076 -
Player bench 2,5m with a bottle
shelf C10015 + C10063 -
Player bench 2m with a bottle
shelf C10014 + C10077
Player bench
Sturdy steel profile framed player bench upholstered with HD-polyethylene. The bench legs are steel profiled with a black protective tube that shields the skates. The benches can be connected to each other and if necessary to the floor.
The stock colour of the bench is black, but it’s also available in red, blue or yellow.
BENCH SIZES:
- Player bench 3m C10018
- Player bench 2,5m C10015
- Player bench 2m C10014
official´s box furniture
officials´ chair
C10039 Officials´ chair with a backrest
The officials´ chairs are meant for furnishing the officials´s box. The chair is available with black upholstering and a black frame.
Dimensions: 465mm W x 410mm D x 480mm H
Total height: 800mm
The chair is stackable.
officials´ table
C10040 Foldable officials´ table
The table has a foldable frame. The colour of the frame is black and the table cover is made out of white high-pressure laminate.
Dimensions: 500mm W x 1200mm L x 750mm H
officials´ table 2m
Aluminium framed officials´ table with a white plywood table cover.
Dimensions: 600mm D x 2000mm L x 800mm H
The table cover is made out of white high-pressure laminate.
officials´ table 2m
Aluminium framed officials´ table with a wooden cover.
Dimensions: 600mm D x 2000mm L x 770mm H
The cover is made out of durable laminate.
officials´ tabe 2,5m
Aluminium framed officials´ table with a white plywood table cover.
Dimensions: 600mm D x 2500mm L x 800mm H
The cover is made out of durable white laminate.
officials´ table 2,5m
Aluminium framed officials´ table with a wooden cover.
Dimensions: 600mm D x 2500mm L x 770mm H
The cover is made out of durable laminate.
stick holder
C10033 STICK HOLDER
A hockey stick holder. The holder is designed for storing the sticks in the box, the dressing rooms or the rink corridors.
Steel frame, painted black. Plywood base.
Dimensions: 650mm (deep) x 1000mm (wide) x 1250mm (height)
stick holder team model
C10034 STICK HOLDER
A hockey stick holder. The holder is designed for storing the sticks in the box, the dressing rooms or the rink corridors. The holder is mounted on a vertical surface and has places for 14 sticks.
Hot galvanized powder coated steel. Colour cyan.
Dimensions: 185mm x 1000mm
stick holder
C10032 HOCKEY STICK HOLDER. The holder is designed for storing the sticks in the box, the dressing rooms or the rink corridors. The holder is mounted on a vertical surface and has places for 30 sticks.
Hot galvanized powder coated steel. Colour cyan or white
Dimensions: 106mm x 1000mm